We often encounter clients who come to this company. This does not mean that they understand each other and imitate each other’s technical skills before entering the strategy. The substantive specialization of competing with each other is a person of individual value and consensus.
Any form of machine tool should ensure starting from the coordinate system. Wire cutting machine tools include external contour and internal shape datums, and the design datums of these datums should be consistent with the basic datums. Otherwise, when processing programming, programming, or other work needs to be completed, these datums should be consistent with the basic datums.
The most obvious advantage lies in the three holes: uniform and precise transmission and precise motion; Although they are only a few features of the datum, they are absolute values on the machining surface and on the tool or workpiece, as they are composed of three datums. Therefore, no matter which direction it is, a unique benchmark selection is required.
Typical control principle: The device should be flexible and cannot be represented by program code. The importance of executing line writing is that the input programs of CNC blades must follow the principle of “first elimination”, because these programs execute linear interpolation (arc interpolation), non parallel interpolation (bending arc expansion rate), non parallel interpolation (try to use corner cleaning keys), macro program programming (sample blocks before machining), etc.
Introduction: It is a given introduction that must be detailed on the panel, and in order to punch holes, some details can be filled in the panel (mainly keyboard patterns), so that everything is easy.
Introduction: When typing, the keyboard must be used. When typing is completed, the buttons are indicated with an indicator light; When programming, the buttons were turned off; When determining the value to be typed, the buttons can sometimes match the typing on the panel separately.
Introduction: Before typing, add a clear corner key at the end of the input, otherwise the tin head should be listed separately from the board to avoid arbitrary movement of the input board wire.
Introduction: Before typing, pay attention to the end of the key. After typing, add a clear angle to the end of the key to prevent it from shaking.
Introduction: Before typing, there is a fixed semicircular hole on the board. In the introduction, if it is a tin tube, the radius of the tin tube must be smaller than the wire diameter of the tin tube. Therefore, the introduction will label the conductive copper tube on the panel.
Introduction: Before typing, there is an attractive indicator on the board, with a pulse signal at the top and position of the guide, and an indicator located on the board for cutting through the guide wire.
Jingda Industrial Machinery Processing Factory, Jiangsu Large Machinery Equipment Processing, Lathe Processing Price, Imported Pump Processing, High Quality, Welcome to Choose.
The difference between a vertical lathe and a horizontal lathe is that its spindle is vertical. The workpiece of a vertical lathe is installed on the workbench, and the cutting chips pass through the spindle box to form a “ring”.