Our engineers’ demand for you is our sales revenue, and their design precisely reflects our manufacturing level.
The product can be applied for acceptance upon leaving the factory, and our sales team will immediately sign a written trademark for your reference.
Choose a high-quality product for this professional booth (3 booths). Use the 3:12 series of products in this paragraph as a reference for participation, and prepare materials in advance, including Cognex Corporation, Hammer, Delsen, Jinfeng, etc.
The model is a diamond shaped expansion, and the user has decided to register first. Why should the mold be real and transparent. The visual representation model is indeed similar to the actual product. The premise is that the length and diameter of the skateboard should be half of the mechanical length of the screw.
The “mold base” indicates that the mold base is a mold, which should have the same device as the mold to simulate swing and conduct a direct trial punching mode. So the simpler the structure of the ‘mold base’, the better. There are two types of mold bases for standard parts. One is the C-type, where the mold is pushed to an independent standard station.
The A-type standard station is the C-type. The involute is completed by SKD-11 from SKD-11 to C-type, but they do not function as hexagonal discs. There are generally four types of mold bases: vertical, horizontal, single column, and double column. Another type of selection is the standard workstation, which does not complete the skip step due to excessive stamping speed, which requires practical skills from production personnel.
The C-type tool creates a machining method for mold punching, which is currently a popular type of mold, especially a stamping type. Vertical stamping molds are more suitable for injection molds for stamping, due to the small flow resistance between the affected mold embryos. The benefits of this method are the same as those of vertical stamping molds, which are suitable for automotive parts with small modulus and also for processing small batches of different parts.
At present, vertical stamping molds can still process parts very well relative to the bottom. But their main difference is that the stamping speed is too fast, which can easily cause small batches or even disorder (increasing product life). This method is suitable for mixing simple formed parts, and its lifespan is several times longer than that of stamped parts. The cost of stamping production is relatively high, and the cost of manufacturing molds is also high. In addition to increasing the number of molds, there is also a trend towards replacing stamping processes and stamping parts production.